An exhaust is a surprisingly easy thing to misdiagnose. The rattle you hear at idle may be a heat shield rather than a box, and the blowing noise may be a gasket that costs less than a back box. We put the car in the air and inspect the whole system before quoting anything.
Where a section is sound we repair rather than replace. Where it has rotted through we fit a part that will last — and if a cheap aftermarket box will do the same job as a costly one for your car, we will say that too. Emissions failures get diagnosed properly, whether that is a lambda sensor, a cat, or a leak letting air into the system before the sensor.
What is included
- Full system inspection from manifold to tailpipe
- Back boxes, centre sections, flexi pipes and gaskets
- Weld repairs and heat shield refitting
- Catalytic converter and DPF assessment
- Lambda and oxygen sensor replacement
- Emissions testing and MOT emissions failure diagnosis
What happens, step by step
Listen and look
We inspect the system on the ramp — noise alone rarely identifies the right part.
Quote the section
Repair where possible, replace only what needs it, with options where they exist.
Fit
Most exhaust sections are same-day; manifold or turbo-downpipe work may need longer.
Check the light
If an engine light was triggered, we confirm it stays out after the repair.
Where this happens
All workshop work is carried out at Unit 30, Stevenage Enterprise Centre, SG1 3HH — five minutes from Stevenage town centre and the Old Town, with parking on site. Drop-off is from 07:30 on weekdays. If the car cannot be driven, call 07876 714 517 for recovery.
